These are mobile / receipt-class printers, not 4×6 shipping desks. Use QL-compatible receipt or label stock. Do not load CR80 cards or a 4×6 shipping roll unless this exact unit is rated for that width.
- Open the media door.
- Seat the roll so the print surface faces the printhead as it feeds out.
- Close the door until it latches. If it will not latch, the roll is too wide or off the core.
- Press Feed once. One clean label or receipt should issue.
For a configuration print, load journal media with no black bars on the back, then follow the QL self-test.
Open Setup Studio for a guided path · Call (312) 416-1518 · Contact